Mindray MPM Module Parameter Board M51A-20-80860 In Good Working Condition

Mindray MPM Module Parameter board M51A-20-80860

► Brief Introduction

The Mindray MPM Module parameter board is a vital component in modern patient monitoring systems, offering versatile and reliable monitoring of essential physiological parameters. Its modular design, coupled with high accuracy and integration capabilities, makes it an essential tool in enhancing patient care across various healthcare settings.

Using the Mindray MPM Module parameter board effectively requires proper installation, operation, and maintenance. By following these steps, healthcare providers can ensure accurate and reliable patient monitoring, contributing to better patient outcomes.

► Overview

• Insert the Module: The MPM module typically slots into a designated bay or compartment in the Mindray patient monitor. Ensure it is securely inserted.
• Connect Sensors: Attach the relevant sensors and cables (e.g., ECG leads, SpO2 sensors, NIBP cuffs) to the corresponding ports on the parameter board.
• Turn on the Monitor: Once the module is securely installed and all sensors are connected, power on the Mindray monitor.
• Initial Configuration: The monitor may require initial configuration to recognize the new module and ensure all parameters are set correctly.
• Choose Monitoring Parameters: Using the touchscreen or control buttons on the monitor, select the parameters you wish to monitor (e.g., ECG, SpO2, NIBP).
• Customize Settings: Adjust the settings for each parameter according to the patient’s needs (e.g., alarm limits, measurement intervals).
• ECG Leads: Place ECG electrodes on the patient's chest as per the standard 5- or 12-lead placement.
• SpO2 Sensor: Attach the SpO2 sensor to a suitable site (usually a fingertip).
• NIBP Cuff: Place the blood pressure cuff around the patient’s upper arm.
• Initiate Measurements: Start the monitoring process from the monitor’s interface. Ensure that real-time data starts displaying on the screen for all selected parameters.
• Monitor Patient: Continuously observe the patient’s vital signs on the display. The monitor will provide visual and audible alarms if any parameter goes out of the preset range.
• Check Sensors: Periodically verify the accuracy of sensors and recalibrate if necessary, following the manufacturer’s guidelines.
• Inspect Cables and Connectors: Ensure all cables and connectors are in good condition to maintain reliable readings.
• Disinfect Sensors: Clean and disinfect sensors and cuffs according to the hospital’s infection control protocols.
• Monitor Hygiene: Wipe the monitor and module with appropriate cleaning solutions to prevent contamination.
• Update Firmware: Keep the monitor and module firmware up to date by installing the latest updates from Mindray. This ensures optimal performance and security.
• Respond to Alerts: Follow on-screen instructions to resolve any error messages or alerts.

► Specification

Thank you for your time! If you have other questions about our Mindray MPM Module Parameter board M51A-20-80860, please feel free to contact us. We are always ready to serve you.

Mindray MPM Module Parameter board

Good Working Condition Parameter board

M51A-20-80860 Parameter board

Mindray MPM Module Parameter Board M51A-20-80860 In Good Working Condition Images